Best Saw Blade For Melamine [ Reviews And Buying ]

How proud would you be if you completed a furniture remodeling project in your own home? You can DIY the whole project, only if you have the right saw blade. So, which is the right saw blade for melamine? You need to look out for factors such as kerf, the material it is made with, the number of teeth, compatibility, the type of saw, and a few other issues. With blades for melamine, the more teeth, the finer the cut.

The best saw blade for melamine must be double-sided to minimize chipping. You can use such blades to cut veneer or furniture.

Luckily, we have reviewed a few of the best saw blades for melamine. This should get you started soon.

Best Saw Blade For Melamine Reviews

Cutting melamine requires you to have the right blade regardless of the type of saw you have. Whether you need a saw blade for your table saw track saw, jigsaw, circular saw, or miter saw, we have top recommendations here.

1. Freud 7-1/4″ x 60T Thin Kerf Ultimate Blade

With a 7 ¼ inch bade diameter and Hi-ATB grind, you have the ultimate plywood and melamine blade. It features a thin kerf to achieve clean and precise cuts, so expect zero large chips when cutting melamine, fine moldings, laminates, veneered plywood, or solid woods.

Want a quiet operation? Perfect, the thin kerf, anti-vibration slots, and Hi-ATB tooth design make that possible. At the end of the operation is a smooth cut, you won’t have to use a scoring blade. This is one of the best miter saw blade for melamine that can transform your tool into real equipment.

Freud used TiCo high-density carbide to make the tips and a perma-shield coating that controls heat circulation and friction in the blade to protect it as well as the work surface. The nonstick coating also prevents debris and resin from building up in the blade. These construction materials also guarantee to cut different materials with a thickness between ¼ and 1 5/8 inches for a long time.

The thin kerf blades have 60 teeth that feature a high alternating top bevel configuration. The teeth face opposite directions for clean crosscutting and splinter-free finishes. You can face any cross-cut applications with these blades, even if it is heavy-duty.

Freud backs up this melamine blade with a manufacturer’s warranty. So, if the blades have any design faults, you can ship them back to the manufacturer for repair at no cost.

I highly recommend purchasing this melamine blade because Freud maximizes the performance and the cutting life of this tool. Take advantage of the perma-shield and you will get all that you want for a blade.

Specifications

  • Material: Blend
  • Brand: Freud
  • Dimensions: 6.25 x 0.82 x 0.51 inches
  • Color: Multi
  • Number of Teeth: 60
  • Item Weight: 0.15 Pounds

Pros

  • Nonstick coating to control heat and friction
  • Makes minimum noise
  • Maximum performance
  • Fast blade
  • Thin kerf

Cons

  • Not compatible with track saws
  • The lade flexes when cutting

Frequently Asked Questions

Can this saw blade fit Festool TS &75?

The saw blade is too small and only fits TS 55.

Can the blade cut a PVC pipe and leave a smooth finish?

The blade is designed for cutting melamine but I believe it can do a perfect job when cutting PVC pipe.

2. BOSCH DCB1080 Daredevil10-Inch Circular Saw Blade

Looking for the best circular saw blade for melamine? This portable circular saw blade with 80 teeth is exactly what you need if you have stationary material. The blades are made of brute carbide-an upgraded C3/C4 micro-grain formulation and extra hard steel that increases resistance to deflection or bending.

The ATB teeth are arranged in a way that delivers quick trimming, cutoffs, and crosscutting of wood or plywood. The entire job is completed without friction, burning, or melting. This tool features a triple sharp tooth grind for perfect smooth finishes, so you must be careful when handling it.

Bosch threw its weight behind the construction materials and used innovative engineering to create a quality blade for your cutting jobs. The blades are made of carbide and hard steel. You can be sure of owning this blade for a long time.

Do you wish to cut immovable wood? This melamine blade weighs almost 2 pounds with a 10” diameter making it easy to carry around. You can move it from point to point if the plywood you want to cut is stationary.

DCB1080 Daredevil comes with a manufacturer’s warranty which you have to request from the customer support desk. The manufacturer’s warranty covers any faults in the design of the blades.

In my expert opinion, this is the best saw blade for melamine if your work involves moving around to different locations to complete daily cutting tasks. The thin kerf and circular blade offer the best performance for stationary materials.

Specifications

  • Material: Carbide
  • Brand: BOSCH
  • Dimensions: 12 x 14 x 0.31 inches
  • Color: Blue
  • Number of Teeth: 80
  • Item Weight: 1.75 Pounds

Pros

  • Best performance
  • Damage resistance
  • Ideal for crosscutting, trimming, and cutting off
  • Minimum waste
  • Antifriction saw blade
  • Durable carbide
  • Thin kerf for better performance

Cons

  • Not good for precision cuts

Frequently Asked Questions

Can I use this blade to cut veneered plywood?

The saw is designed for cutting melamine but its high tooth count makes it work well on plywood.

What type of teeth does the blade have?

The blade is designed with angled teeth.

3. Norske Tools NCSBP272 8-1/4-inch Saw Blade

This is the best saw blade that everyone is looking for, it offers the ultimate finishing on melamine, hardwoods, laminates, and laminate flooring. Its high ATB tooth design ensures you get the best results.

It features a laser-cut body and expansion slots that make sure the blades do not make any noise when cutting. Additionally, Norske made sure to include anti-vibration technology to reduce the vibration rate when in operation.

No need to be a professional to use this blade. It can be used by professional trim carpenters, cabinet makers, or anyone who wants to DIY any melamine, wood, and laminate cuttings at home. It is good stationery saw that is easy to use.

This tool features C4 micro-grain carbide tips sharpened on all sides to complete the job quickly and precisely. The sharp blades cut the surface of your choice just the way you want it.

Norske used carbide and diamond to construct this melamine blade ensuring its longevity and reliability. It has 60 teeth to ensure fine cutting with minimum dust produced.

Can you move this saw to stationary materials? This is the best circular saw blade for melamine, portable enough to be moved to stationary materials that need to be cut. It weighs only 15 ounces and comes as one tool.

Specifications

  • Brand: Norske Tools
  • Material: Carbide, Diamond
  • Size: 8-1/4” x 60 Teeth
  • Dimensions:   ‎10.7 x 9.7 x 0.2 inches
  • Weight: ‎15.2 ounces

Pros

  • Ultra-smooth cutting
  • Anti-vibration
  • Noise-free
  • Durable carbide and diamond
  • Minimum dust generated
  • Great for professionals and DIYers

Cons

  • Motor strain
  • Melamine coat chips

Frequently Asked Question

Does this saw blade produce smooth cuts?

The saw works well but I wouldn’t recommend it for cutting walnut, maple, and cherry.

Can it fit in Ryobi 10-inch table saw?

The blade is designed for a 10-inch table saw, so it will work well on a Ryobi 10-inch table saw.

4. DEWALT 10-Inch Miter / Table Saw Blades

Are you looking for the Best table saw blade for melamine for your workshop? DEWALT has this sharp carbide blade ideal for cutting hardwood, softwood, plywood, and chipboard. It is fast and cuts wood with utmost accuracy.

It features 60-tooth blades for cross-cutting and fine finishing and 32-tooth blades for ripping and general cutting. You will finish slide miter, track saw, radial and miter saw jobs perfectly.  These thin-kerf blades make incisions quick and with minimum dust.

There is no straining when using this blade since DEWALT patented a wedge shoulder with extra steel at the back of every tip so you can maximize precision and strength. The blades are made of tungsten carbide, so you can be sure to have them for eternity. Also, the blades are computer balanced and tensioned to get rid of vibrations and prevent breakage.

If you deal with the toughest of cutting jobs, this heavy-duty combo pack was specifically made for you. Dewalt made sure to put absolute confidence in the design of this tool.

Wondering whether this tool is compatible? You are covered. Its 5/8-inch arbor is compatible with different blades such as radial arms, chop saws, and table saws.

There will be no interruptions or binding because this tool features an anti-kickback blade. It also has expansion slots that control the heat inside. This increases durability.

Having worked in a wood workshop for a long time, I will not think twice about recommending this table saw. It gives an admirable smooth finish to any piece of wood you cut. You will not think about buying another tool for years.

Specifications

  • Material: Carbide
  • Brand: DEWALT
  • Dimensions: 13.75 x 13.75 x 0.19 inches
  • Color: Metallic
  • Number of Teeth: 60
  • Style: Blades
  • Item Weight: 1361 Grams
  • Number Of Pieces: 60

Pros

  • Reliable cross-cutting and ripping
  • No kickbacks
  • Even heat dispersion
  • Durable tungsten carbide
  • Compatible with various saw blades

Cons

  • Compromised quality
  • Dull blades

Frequently Asked Questions

Can I use the blade for cutting laminate flooring?

Yes, I have used it to cut laminate for the kitchen, and it works without any problems.

Can the blade fit on a 10-inch table saw?

This is a 10-inch blade so it will not fit on the 8-inch table saw because of the difference in the 2-inch diameter.

How To Choose The Best Saw Blade For Melamine?

When handling a special material you will need to use the right saw blade. You might be asking if you need a special saw blade to cut melamine. The answer is yes, you need a special blade to cut melamine. Melamine is made of very brittle material. This means you have to be careful when cutting melamine. You need to use a special circular saw blade specifically designed for cutting melamine. Making smooth cuts using your saw depends on the type of blade you have.

In what type of saw will the blade be used?

Different blades are designed to be used on different saws. Some blades will work best on certain saws. This means, that to get the right saw blade that you will use to cut the melamine, you first need to understand the type of saw that you have. Using the wrong saw blade on any saw will lead to poor results. Your cuts may not be smooth as they should be. Be sure to get the right blade depending on the type of saw.

The size of the melamine the blade will be used to cut

If you are cutting a lot of melamine materials, it will still affect the blade you need to choose. In the same way, if you are dealing with a small piece of melamine the blade type will be different. Certain blades work perfectly on melamine but they cannot cut a lot of melamine. They will surely cut good cuts at the beginning but as the material increases, their effectiveness goes down. The large size of the melamine will affect your choice of blade.

What type of cuts will the blade be used to make?

While cutting material in this case melamine, you make different cuts from different angles. You might do the crosscutting which is cutting across the melamine or ripping. Different results will be obtained from different cuts and that will entirely depend on the blade you use. For perfect results use the most fitting blade for any type of cut.

Do you want an all-purpose blade?

Do you want one blade that will serve all your types of cuts or do you want to stock many blades for different cuts? If you want an all-purpose blade that will affect your choice. You will have to look for only one type of blade that can do all the types of cuts on the melamine.

Need to stock many blades? This means you go around looking for different blades for specific cuts and buy them all. You will always change the blade anytime you want a different cut.

Number of teeth on any blade

The more teeth a blade has, the more smooth the cut will be. Blades with few teeth remove material faster. A rip blade is not designed to produce a smooth cut but will leave a clean cut. A crosscut blade is alternatively designed to produce smooth cuts across the material.

This is why the crosscut blade has many teeth around 60 to 80 teeth. If you are looking forward to getting smooth cuts use a crosscut blade that will not tear the melamine.

The gullet

The space in front of each tooth is what we call the gullet which allows chip removal. In cross-cutting blades, the chips are always small in size and fewer per tooth thus the gullet here is smaller. In ripping blades the chip size is bigger as the feed rate is high thus the gullet is big.

Frequently Asked Questions

What Type Of Saw Blade Is Best For Melamine?

Melamine is a fragile material, you need a special blade to cut it. Five different blades can be used to cut melamine. I would recommend you to use the  Thin kerf ultimate plywood and melamine blade for perfect cuts.

How to change the Ryobi circular saw blade?

Firstly you will remove the battery on the circular saw then remove the blade guard so that you leave the blade exposed. Remove the worn blade then change the old circular blade with a new one. Replace the arbor nut and test the blade.

How to change the Dewalt circular saw blade?

First, disconnect the power supply and place the saw in a secure place. Enable the arbor lock and rotate the blade. Place the blade on a wooden platform and loosen the nuts. Depress the arbor button as you slide the new blade in.

How to sharpen a circular saw blade with a Dremel?

Get everything that you will need ready beforehand. Secondly, prepare your working area and dress up in safety gear. Disconnect the power and remove the blade. Prepare the Dremel and start the sharpening process.

Conclusion

Cutting melamine boards can be a little tricky and messy if you do not have the right machine. There will be a lot of dust, chipping, noise and jamming. This can get annoying especially if you want to finish the task quickly. If you get the best saw blade for melamine, you will not experience this.

All the blades reviewed here can get the job done clean, fine, and fast. Buy one of them and you will not regret it. All the above saw blades are designed to work with different types of saws. Remember not all saw blades can cut melamine boards, consider all the factors we mentioned before buying.

Leave a Comment